[[File:Lemo-pinout.png|alt=Lemo Pinout|Lemo pinout.The connections given are defined as 'when looking into the sockets'.[https://www.cryptomuseum.com/radio/selex/prr/index.htm <nowiki>[1]</nowiki>]|thumb]]
==== LEMO ====
==== LEMO ====
Line 22:
Line 20:
# GND / Brown (blue) (sprk)
# GND / Brown (blue) (sprk)
# GND / White (mic)
# GND / White (mic)
<nowiki>*</nowiki>Numbering clockwise from the back of the connector[[File:TJ-101.png|thumb|JT-101 techincal documentation [https://eu.mouser.com/datasheet/3/59/2/tj_101.pdf <nowiki>[2]</nowiki>]]]
With dynamic microphone you must use dynamic to electrec microphone adapter circuit. Quick googleing finds that Peltor MT7, MT73 and MT14 microphones needs the adapter board. Peltor MT53 should be electrec microphone by default and should not need the adapter board. (Not tested)
===== Civil / Peltor connection style =====
Tested with Peltor MT7 microphone.
* A/1) Speaker GND / Brown (blue)
* [[File:Dyn-to-elec-converter-circuit.png|thumb|Dynamic microphone to electret microphone input circuit [https://www.transkommunikation.ch/dateien/schaltungen/diverse_schaltungen/audio_circuits/Dynamic%20microphone%20to%20electret%20microphone%20input.pdf <nowiki>[3]</nowiki>]]]'''Partlist'''
With dynamic microphone you must use dynamic to electrec microphone adapter circuit. Quick googleing finds that Peltor MT7, MT73 and MT14 microphones needs the adapter board. Peltor MT53 should be electrec microphone by default and should not need the adapter board. (Not tested)
Tested with Peltor MT7 microphone.
Dynamic microphone to electret microphone input circuit [3]Partlist
